Nickel Alloy Material
Nickel Alloy is a family of iron-based alloys containing chromium, which helps provide corrosion resistance. Different grades offer varying combinations of strength, formability, weldability, machinability and resistance to heat or chemicals. The appropriate grade depends on the intended service conditions and applicable standards.
Nickel Alloy is widely used in fabrication, process equipment, construction, food handling, chemical processing, water systems, transport and general engineering. Grade selection should consider corrosion exposure, temperature, mechanical loading and fabrication requirements.
SHIV ENTERPRISE supplies Nickel Alloy products in different forms and configurations according to customer requirements, drawings, dimensions and application needs.
Nickel Alloy Components.
SHIV ENTERPRISE offers a wide range of Nickel Alloy components for engineering, machinery, industrial and manufacturing applications.
Engineered for Industrial Performance.
Our Nickel Alloy product range includes wire and rod, tubes and pipe, round and hex bar, flat and bus bar, coil and strip, sheet and plate, flanges and fittings, buttweld fittings, rings and circles, angles and channels.
Components can be supplied in standard sizes or manufactured according to customer drawings, specifications and dimensional requirements.
Nickel Alloy Product Range
Nickel Alloy Wire and Rod
Wire and rod stock for forming, machining and general fabrication.
Nickel Alloy Tubes and Pipe
Tubular products for fluid handling, structures and process systems.
Nickel Alloy Round and Hex Bar
Round and hex bars for machining, fasteners and engineered parts.
Nickel Alloy Flat and Bus Bar
Flat bars and bus bars for fabrication and electrical applications.
Nickel Alloy Coil and Strip
Coil and strip materials for forming and precision manufacturing.
Nickel Alloy Sheet and Plate
Sheet and plate products for equipment, panels and heavy fabrication.
Nickel Alloy Flange and Fitting
Flanges and fittings for piping and industrial connections.
Nickel Alloy Buttweld Fitting
Buttweld fittings for pipe routing and process installations.
Nickel Alloy Ring and Circle
Rings and circles for machining, fabrication and component production.
Nickel Alloy Angle and Channel
Angle and channel sections for structural and support fabrication.
Chemical Composition
The chemical composition of Nickel Alloy varies according to the specific grade and applicable standard. A typical copper-tin Nickel Alloy composition may contain the following elements:
| Element | Typical Composition |
|---|---|
| Copper (Cu) | Approx. 85–88% |
| Tin (Sn) | Approx. 8–10% |
| Zinc (Zn) | Approx. 2–5% |
| Lead (Pb) | Small percentage, depending on grade |
| Other Elements | Residual / grade dependent |
Important: Nickel Alloy composition can differ significantly depending on the grade, standard and application. Final chemical values should be confirmed against the applicable material specification or customer requirement.
Mechanical Properties
Mechanical properties vary significantly by Nickel Alloy grade, product form, condition and applicable standard. Confirm the specific grade and mill test certificate for actual values:
| Property | Typical Value / Range |
|---|---|
| Tensile Strength | Grade and product-form dependent |
| Yield Strength | Grade dependent |
| Elongation | Grade and condition dependent |
| Hardness | Grade and condition dependent |
| Density | Typically about 7.7–8.0 g/cm³; grade dependent |
Mechanical properties are indicative only. Actual values depend on the selected grade, casting condition, product dimensions and applicable specification.
Nickel Alloy Product Range
SHIV ENTERPRISE offers Nickel Alloy components for different industrial requirements. Products can be supplied according to required dimensions, drawings and specifications.
Nickel Alloy Applications
Nickel Alloy is used in applications where wear resistance, corrosion resistance, machinability and reliable performance are important.
Casting & Forging Solutions
SHIV ENTERPRISE also supports industrial requirements involving casting and forging. Components can be developed according to customer drawings, dimensions, material specifications and application requirements.
Our approach focuses on appropriate material selection, dimensional requirements and dependable supply for engineering and industrial applications.
Custom Requirements: Customers can provide drawings, specifications, dimensions or application details for product evaluation and supply requirements.
Available Forms & Sizes
Nickel Alloy products can be supplied in standard or customer-required configurations, subject to grade, size and manufacturing requirements.
Your Trusted Metal Supply Partner
SHIV ENTERPRISE is a Mumbai-based manufacturer, stockist, supplier and worldwide exporter of ferrous and non-ferrous metal products.
We support customers with material sourcing, product supply, casting and forging requirements and solutions based on drawings, specifications and application requirements.
Nickel Alloy FAQ
Nickel Alloy is a copper-based alloy, traditionally associated with copper-tin compositions. It is used for engineering components requiring good wear resistance, corrosion resistance and machinability.
SHIV ENTERPRISE supplies Nickel Alloy Wire and Rod, Tubes and Pipe, Round and Hex Bar, Flat and Bus Bar, Coil and Strip, Sheet and Plate, Flanges and Fittings, Buttweld Fittings, Rings and Circles, and Angles and Channels.
Yes. Nickel Alloy is commonly used for bushes, bearings and other sliding components because of its combination of wear resistance, machinability and suitable friction characteristics.
Yes. SHIV ENTERPRISE can evaluate customer drawings, dimensions and specifications for Nickel Alloy bushes and other engineered components.
The listed range includes wire and rod, tubes and pipe, bars, flat and bus bars, coil and strip, sheet and plate, flanges and fittings, buttweld fittings, rings and circles, angles and channels.
Yes. SHIV ENTERPRISE is a worldwide exporter of ferrous and non-ferrous metal products and supports international supply requirements.
Yes. Grade selection should match the specific environment and exposure conditions. Confirm the grade and applicable standard before ordering.
SHIV ENTERPRISE is located in Vasai East, Palghar, Maharashtra, India and supplies metal products to customers across India and international markets.
Need Nickel Alloy Products?
Send us your required grade, dimensions, quantity or drawing for your requirement.