Brass Material
Brass and brass-alloy is a brass-based alloy family that commonly contains aluminum and nickel, with other alloying elements depending on the grade. Exact properties and suitability depend on the specified alloy, product form and operating conditions.
Brass is used for engineered components such as bearings, bushes, collars, flat bars, rods and flanges, particularly where strength, wear performance and resistance to corrosion are important.
SHIV ENTERPRISE supplies Brass products in different forms and configurations according to customer requirements, drawings, dimensions and application needs.
Brass Components.
SHIV ENTERPRISE offers a wide range of Brass components for engineering, machinery, industrial and manufacturing applications.
Engineered for Industrial Performance.
Our Brass product range includes bushes, bearings, half bearings, collar bushes, flats, rods and flanges.
Components can be supplied in standard sizes or manufactured according to customer drawings, specifications and dimensional requirements.
Brass Product Range
Brass Wire and Rod
Brass wire and rod for electrical, engineering and fabrication requirements.
Brass Tubes and Pipe
Brass tubes and pipes for specified fluid, thermal and industrial systems.
Brass Round and Hex Bar
Brass round and hex bars for machining and precision component manufacture.
Brass Flat and Bus Bar
Brass flats and bus bars for electrical distribution and fabrication applications.
Brass Coil and Strip
Brass coils and strips supplied for forming, fabrication and industrial use.
Brass Sheet and Plate
Brass sheets and plates for fabrication and engineering applications.
Brass Flange and Fitting
Brass flanges and fittings selected to match project requirements.
Brass Buttweld Fitting
Brass buttweld fittings for compatible piping and fabrication systems.
Brass Ring and Circle
Brass rings and circles for machining, fabrication and component production.
Brass Angle and Channel
Brass angles and channels for specified structural and fabrication needs.
Chemical Composition
The chemical composition of Brass varies by alloy designation, product form and applicable standard. Brass is a copper-based alloy in which zinc is the principal alloying element; some grades may also contain lead, tin, aluminum, iron or other elements. Exact composition depends on the specified grade and standard. The indicative table below is for general guidance only:
| Element | Typical Composition |
|---|---|
| Copper (Cu) | Major constituent; percentage varies by grade |
| Other alloying elements | Present according to the specified alloy grade |
| Zinc (Zn) | Principal alloying element; percentage varies by grade |
| Other Elements | Controlled according to the applicable alloy specification |
| Residuals | Controlled by the applicable grade standard |
Important: Brass chemistry varies by grade and product specification. Confirm exact chemical limits against the applicable material standard and mill test certificate before ordering.
Mechanical Properties
Typical mechanical properties depend on the exact Brass grade, manufacturing method, heat treatment and product form. Representative values may include:
| Property | Typical Value / Range |
|---|---|
| Tensile Strength | Depends on alloy grade and product form |
| Yield Strength | Grade dependent |
| Elongation | Depends on alloy grade and product form |
| Hardness | Depends on alloy grade and product form |
| Density | Confirm for the selected alloy grade |
Mechanical properties are indicative only. Actual values depend on the selected grade, casting condition, product dimensions and applicable specification.
Brass Product Range
SHIV ENTERPRISE offers Brass components for different industrial requirements. Products can be supplied according to required dimensions, drawings and specifications.
Brass Applications
Brass is selected for applications where wear resistance, corrosion resistance, machinability and reliable performance are important.
Casting & Forging Solutions
SHIV ENTERPRISE also supports industrial requirements involving casting and forging. Components can be developed according to customer drawings, dimensions, material specifications and application requirements.
Our approach focuses on appropriate material selection, dimensional requirements and dependable supply for engineering and industrial applications.
Custom Requirements: Customers can provide drawings, specifications, dimensions or application details for product evaluation and supply requirements.
Available Forms & Sizes
Brass products can be supplied in standard or customer-required configurations, subject to grade, size and manufacturing requirements.
Your Trusted Metal Supply Partner
SHIV ENTERPRISE is a Mumbai-based manufacturer, stockist, supplier and worldwide exporter of ferrous and non-ferrous metal products.
We support customers with material sourcing, product supply, casting and forging requirements and solutions based on drawings, specifications and application requirements.
Brass FAQ
Brass is a copper-zinc alloy whose exact composition depends on the grade; some varieties include additional alloying elements. It is selected for components that require strength, wear resistance and corrosion resistance.
SHIV ENTERPRISE supplies Brass Wire and Rod, Brass Tubes and Pipe, Brass Round and Hex Bar, Brass Flat and Bus Bar, Brass Coil and Strip, Brass Sheet and Plate, Brass Flange and Fitting, Brass Buttweld Fitting, Brass Ring and Circle, and Brass Angle and Channel.
Yes. Brass is commonly used for bushes, bearings and other sliding components because of its combination of wear resistance, machinability and suitable friction characteristics.
Yes. SHIV ENTERPRISE can evaluate customer drawings, dimensions and specifications for Brass bushes and other engineered components.
SHIV ENTERPRISE supports casting requirements along with the supply of ferrous and non-ferrous metal products, subject to component specifications and application requirements.
Yes. SHIV ENTERPRISE is a worldwide exporter of ferrous and non-ferrous metal products and supports international supply requirements.
Brass products can be evaluated and supplied according to applicable dimensions, material requirements, drawings and customer specifications.
SHIV ENTERPRISE is located in Vasai East, Palghar, Maharashtra, India and supplies metal products to customers across India and international markets.
Need Brass Products?
Send us your required grade, dimensions, quantity or drawing for your requirement.